How long do Jotul wood stoves last?

This is also what makes it a highly durable material. Jøtul have a 25-year guarantee on all external cast iron parts, but they are expected to last for a whole generation if not longer, so no compromises regarding material quality are made.

How efficient are Jotul wood stoves?

The best selling medium size Jøtul F 45 V2 Greenville is now EPA 2020 certified. Utilizing Jøtul Turbulator™ non-catalytic technology, the Jøtul F 45 V2 Greenville boasts a low 1.8 gram/hr emission rate and a efficiency of LHV 76.55% HHV 71.15%.

How long is stove wood?

As previously mentioned, standard cut firewood is about 16 inches log. This is because firewood is often sold by face cord, which measures 4 feet tall, 8 feet wide and 16 inches deep. As a result, 16 inches has become the universal length for standard cut firewood.

How much space do you need for a wood burning stove?

At least 36 inches of clearance must be allowed between the top of a stove and an unprotected ceiling. Brick or stone provide little or no protection for a combustible wall since they are good conductors of heat. Therefore, by themselves, these are not suitable as wall protectors.

Where are Jotul stoves made?

Jøtul’s cast iron stoves and fireplaces have been crafted in Norway since 1853. For more than 160 years Jøtul has worked at mastering the art of fighting the cold. Now you can experience elegant craftsmanship with a Jøtul Wood or Gas Stove or Fireplace Insert built right here in Maine.

What wood burns longest?

Hickory is the Longest Burning Wood It’s simple, really: it takes longer for the fire to consume hardwood because there is more fuel “packed” into each log. Hickory has the highest density among firewood (37-58 lbs/ft.3), and therefore burns for the longest time.

What is the best length for firewood?

Firewood should be split is 3-6 inches wide and 16 inches long, which is optimal for household fires and stoves. Thinner firewood will burn too quickly while thicker logs take too long to season (dry out). Outdoor fires have fewer log size restrictions and any size firewood can be burned.

How high above roof does a wood stove pipe need to be?

3 feet
For a building with flat or shallow pitched roof, the chimney needs to be 3 feet above the point where it passes the roof line. For a building with a steeply pitched roof, the chimney opening needs to be 2′ above the highest part of the roof within 10′.

What clearance is required around a wood burning stove?

The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.

Where is Jotul stoves made?

How tall is the flue collar on a Jøtul F500?

3.2 Hearthmount Into a Masonry Fireplace The Jøtul F 500 CB has a rear exit flue collar height of 28 1/4” (718 mm) when installed with standard legs. Substitution of Short Legs will lower the height to 26” (660 mm).

What is the Jøtul F500 V3 made of?

The Jøtul F 500 V3 is constructed of cast iron plates and sealed with stove furnace cement. Cast iron, while very durable, expands and contracts as it is heated and cooled.

How do I install the Jøtul F 500 CB?

The Jøtul F 500 CB must be installed on a non-combustible surface extending: A minimum of 18” (457mm) in front of the stove and the left side load door (measured from the legs). And 8” (200mm) on the right side and back of the stove (measured from side and back panels). This will result in a minimum floor protection of

What are the code requirements for a Jøtul F 500 fireplace?

Consult your local building inspector for codes on fireplace installation. The Jøtul F 500 V3building officials to discuss any local code requirements. has a rear exit flue collar height of 28 1/4” (718 mm) when installed with standard legs. Substitution of Short Legs will lower the height to 26” (660 mm).