What is SSI in aircraft maintenance?

a. A Structural Significant Item (SSI) is any detail, element or assembly, which contributes significantly to carrying flight, ground, pressure or control loads, and whose failure could affect the structural integrity necessary for the safety of the aircraft.

What are the two types of aircraft maintenance?

Types of aircraft inspections can be divided into two broad categories, which include scheduled and unscheduled inspections. Both scheduled and unscheduled maintenance and aircraft inspections are necessary for all aircraft to ensure that they are safe to fly and airworthy.

What is C and D check in aircraft?

C and D checks typically fall under “heavy maintenance,” and are much more extensive than the B check. The C check requires an aviation maintenance technician to perform a deep inspection of a majority of the aircraft’s parts. Also, the C maintenance check can often take the aircraft out of service for 1–2 weeks.

What is SSID in aviation?

This report describes the activities of a Team that was chartered to gain knowledge of the damage tolerance based inspection aspects of the Aging Aircraft Programs and to make recommendations regarding how the FAA should handle the Supplemental Structural Inspection Document (SSID) Airworthiness Directives (ADs).

What is a Ron check?

RON (Remain Over Night) Check Aviation Maintenance Technician at Southwest Airlines.

What is considered an aging aircraft?

The term “aging aircraft” is a moniker used to refer to the burgeoning number of both civilian and military airframes in service that have surpassed their originally intended operational lifetimes.

What is the full form of SSID?

The SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. This is viewable to anyone with a wireless device within reachable distance of your network.

What are airplane mechanics called?

aviation maintenance technicians
A&P Mechanics are also known as aviation maintenance technicians (AMT). A&P stands for airframe and Power Plant, meaning that A&P mechanics are licensed to work on and maintain the external (airframe) and engine (Power Plant) parts of an aircraft.

What is ATA chapter20?

ATA Chapter 20 is the designated area for manufacturers to publish information pertinent to Standard Practice. This may include, but is not limited to, aircraft cleaning, torque values, plumbing installation and bonding tests.

What are C checks?

C-Check means the inspection, overhaul, repair, preservation and replacement of Parts of the Aircraft, including preventive maintenance, identified as a full block C Check under the Airframe manufacturer’s maintenance manuals and planning documents.

What are the three reasons for structural deterioration of an aircraft?

Ageing Aircraft – Structural Failure

• Definition. An aircraft begins to ‘age’ as soon as it first flies and various effects of aging begin to occur almost immediately.
• Discussion.
• Metallic Corrosion.
• Structural Fatigue.
• Accident & Serious Incident Reports.
• Related Articles.
• Further Reading.

Which chapter of aircraft is oldest?

The Eta chapter at San Jose State University is the oldest active chapter, being founded on April 27, 1940….

Alpha Eta Rho
Founded	April 10, 1929 University of Southern California
Type	Professional
Affiliation	Independent
Emphasis	Aviation

What WEP mean?

Wired Equivalent Privacy
Wired Equivalent Privacy (WEP) is a security protocol, specified in the IEEE Wireless Fidelity (Wi-Fi) standard, 802.11b. That standard is designed to provide a wireless local area network (WLAN) with a level of security and privacy comparable to what is usually expected of a wired LAN.

What is aircraft maintenance?

Aircraft maintenance is that part of the process of aircraft technical activity which is conducted on aircraft whilst it remains in the line maintenance or base maintenance environment. Aircraft maintenance is intended to keep the aircraft in a state which will or has enabled a certificate of release to service to be issued.

Does aircraft maintenance include pre-flight inspections?

According to Part-M, Aircraft Maintenance doesn’t include pre-flight inspections. Pre-flight inspection is a type of inspection carried out before flight to ensure that the aircraft is fit for the intended flight. Documents used for Aircraft Maintenance is a part of instructions for continued airworthiness.

What are the documents used for aircraft maintenance?

Documents used for Aircraft Maintenance 1 AMM (Aircraft Maintenance Manual) – 2 IPC (Illustrated parts catalog) – 3 TSM (Trouble Shooting Manual) – 4 SRM (Structure Repair Manual) – 5 AWM (Aircraft Wiring Manual) – 6 ASM (Aircraft Schematic Manual) – 7 CMM (Component Maintenance Manual) –

What are the processes that affect an aircraft?

The processes that affect an aircraft are deterioration with age (e.g. fatigue, wear and corrosion) as well as chance failures (e.g. tyre burst, excess structural loads). Aircraft maintenance can be defined in a number of ways and the following may help understand the different aspects: