What is the name of the GUI interface of HP Tape libraries?

HPE Command View for Tape Libraries (CVTL) is a user interface that helps to manage TapeAssure, licensing, and data verification. For remote management, CVTL provides abrowser-based GUI that allows user to perform the following: Management of the entire library system.

How do I turn off HPE tape library?

Depress the power button on the front panel for 5 seconds and then release it. If the library is idle, you can release the button when the Ready LED begins flashing. If the library does not perform a soft shutdown, press and hold the power button for 10 seconds.

What is mail slot in HP tape library?

The mailslot feature allows the user to insert or remove a single tape without removing the entire magazine. The benefit of using a mailslot is that the library will not inventory the magazine again, allowing the library to continue to function normally.

How do you get a stuck tape off a LTO 7 drive?

Solution

1. Press the Drive Eject Button. The Drive Activity LED should blink to indicate activity.
2. Wait for two minutes for the cartridge to eject, then remove the cartridge by hand.

How do I find my tape library IP address?

Select System Detail > Library > Properties > General. The library IP address is listed in the “Library Interface TCP/IP” section.

How do I connect my tape library to my server?

You can connect the Library directly to the server with a host bus adapter (HBA) or through a storage area network (SAN) with a switch. You must provide a Fibre Channel cable for each tape drive in the Library. The tape drive has an LC-style connector.

How do you open a mail slot?

Open the mailslot with the user interface:

1. If using the remote interface: Select Library in the left menu. From the Mailslot drop-down. , select Open and then click OK.
2. If using the local touch panel: On the Home screen, tap Mailslot. Tap Open Mailslot.

What is the native capacity of MSL 2024 tape library?

System specifications

Specifications	Description
Maximum number of drives	Up to 2
Number of slots	24
Drive interface	8Gb Native fibre channel 6 Gb/s SAS
Maximum capacity	Native	288TB (LTO-8) 144TB (LTO-7) 60TB (LTO-6) 36TB (LTO-5)

What is a feature of a virtual tape library?

In addition to providing faster backup and recovery times, VTLs are scalable, can reduce operating costs and are compatible with other storage features such as deduplication. Both virtual tape libraries and disk-to-disk backups are frequently packaged together with data deduplication.

What is tape Gateway?

Tape Gateway enables you to replace using physical tapes on premises with virtual tapes in AWS without changing existing backup workflows. Tape Gateway supports all leading backup applications and caches virtual tapes on premises for low-latency data access.

How do you remove stuck tape from HP LTO 6?

What is the library IP?

The Library IP Addresses page allows you to view and modify the IP addresses used by your TS3500 tape library for all frames or for individual frames. Individual frames and ports can be configured to use IPv4, IPv6, or both types of addresses. The initial configuration is done using the operator panel.

How do I install a tape library?

Tape library installation checklist

1. Build the library inventory. See Building the library inventory.
2. Update PARMLIB.
3. Update PROCLIB by running CBRAPROC SAMPLIB member.
4. Create the global resource serialization environment.
5. Define the volume catalogs.
6. Define tape drives using HCD.
7. IPL the system.
8. Define the base SCDS.

How do I access my mailbox?

Go to informeddelivery.usps.com. Click on “View My Mail.” If you already have a personal usps.com® account, sign in. If not, create an account.

What is HPE MSL?

The HPE StoreEver MSL Tape Libraries meet demanding storage requirement of businesses needing unattended backup, disaster recovery, or archive capability. The MSL Libraries offer a broad choice of storage capacity and technology including LTO-8, LTO-7, LTO-6 or LTO-5 Ultrium tape drives.