What type of strings are best for slap bass?

Strings made of stainless steel are the most commonly preferred for slapping and popping. They are designed to produce a brighter, louder, sound with a lot of high end – while also producing an adequate amount warmer, fatter, low end tones. Some bassists do use nickel strings for popping and slapping.

What strings are on a 7 string bass?

The most common tunings for a seven-string bass are F♯ to C or B to F; an eight-string F♯ to F; a nine-string F♯ to B♭; a ten-string C♯ to B♭ or F♯ to E♭; an eleven-string C♯ to E♭ or F♯ to A♭; and a twelve-string C♯ to A♭ or B to G♭.

How high should strings be for slap bass?

Slap Style Sound Samples Check the action on your own bass. If it is higher than about 1/8″ (0.125″) you will probably get a much better slap tone by lowering the strings a bit. Keep in mind that not all basses are created equal, some can get lower action than others.

Does slapping damage bass?

Dont worry it wont put any hurt on the bass. The worst thing you can do is break a string from popping.

Is a Jazz bass good for slap?

saxnbass. Jazz is not bad for slap, better than a P. Just go ask Marcus Miller, and many others.

Do you need an active bass to slap?

There are passive basses that sound good slapped and some that don’t, and same goes for active. For the OP, the Jazz sounds like a good choice.

What makes a bass good for slap?

A great slap bass tone should sound “crisp” “round” and “aggressive.” This tone is achieved with the low-end and high-end frequencies boosted and the mid frequencies ‘scooped’ (kept low). This way, it’ll sound “aggressive” and “piercing” with enough bass to pronounce the pop and slap tones.

What are the best strings for a slap bass guitar?

Best Strings for Slap Bass Guitar. 1 Les Claypool: 40-55-75-95/100. 2 Flea: 45-65-85-105. 3 Larry Graham: 40-55-75-95. 4 Mark King: 30-50-70-90. 5 Marcus Miller: 45-65-80-105-130 (5 strings) 6 Victor Wooten: 40-55 -75 -95.

What is the best string for slapping and popping?

Strings made of stainless steel are the most commonly preferred for slapping and popping. They are designed to produce a brighter, louder, sound with a lot of high end – while also producing an adequate amount warmer, fatter, low end tones.

What are the different types of bass strings?

Bass strings are constructed by winding material (such as stainless steel or nickel) around a core wire. The two most common types of wrappings are round wound and flat wound. Rounwound strings have a wrapping that is round. You can feel the ridges of the individual wraps under your fingers. Flatwound strings have a wrapping that is flattened.

What are the different types of string wrappings?

The two most common types of wrappings are round wound and flat wound. Rounwound strings have a wrapping that is round. You can feel the ridges of the individual wraps under your fingers. Flatwound strings have a wrapping that is flattened.