Why is a Ford 9-inch rear end so good?
Why is a Ford 9-inch rear end so good?
The Ford 9-inch is desirable because it has a removable carrier, which allows quick rear end changes. Many racers carry an extra carrier assembly with a different rear end ratio so they can try different combinations on the same day while at the track.
What gear ratio is a Ford 9-inch rear end?
3.0:1 to 5.0:1
The Ford 9 inch rear end also has the widest variety of ratios on the market, Particularly in the 3.0:1 to 5.0:1 range.
What vehicles came with a Ford 9-inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versallies.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
How many Ford 9-inch rear ends are there?
The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis.
What gear ratios are available for a 9 inch Ford?
Choice of Gear Ratios: 2.50*, 2.75*, 3.00, 3.25, 3.50, 3.70, 3.89, 4.11, 4.30, 4.56, 4.71, 4.86, 5.00, 5.14, 5.29, 5.43, 5.67, 5.83, 6.00, 6.20, 6.33, 6.50 NOTE: 2.50 and 2.75 are take out gears.
What did a Ford 8.8 come in?
First appearing in 1977, the 8.8 is found in almost all Ford V8 cars from ’86 on, and in V6 Rangers and Explorers. There are 24 different Fords that offered the 8.8 rear axle. The weakest points of the 8.8 are the 28-spline axles (1.18 inches in diameter).
What Ford vehicles have the 8.8 rear end?
8.8 IRS (Independent Rear Suspension) The 8.8 IRS first saw use in the 1989 model year Ford Thunderbird and later Ford adapted independent suspension to its 3rd generation Explorer and 2nd generation Expedition SUVs. The Mustang first used the 8.8 IRS on 1999-2004 Cobra models.
What Fords had a 9 inch rear end?
What year did Ford make the 9 inch rear end?
The Ford 9-inch rear end, so named because of its 9-inch ring gear diameter, was manufactured from 1957 to 1987 by the Ford Motor Company and installed in some intermediate and most full-size Ford, Lincoln, and Mercury passenger cars, F-Series ½-ton trucks, and Econoline vans.
What bolt pattern is a Ford 9-inch?
Axle Shafts – Torino Flange – 31-Spline – GM 5 x 4.75 Bolt Pattern – Pair.
What did a 9 inch rear end come in?
Are all Ford 8.8 the same?
There are 24 different Fords that offered the 8.8 rear axle. The weakest points of the 8.8 are the 28-spline axles (1.18 inches in diameter). The 31-spline axles (1.29 inches in diameter) are more desirable but far less common.