Can you run 33s on a stock XJ?

yeah cant be done inless you cut the fenders all up. the 33 will not even go in the wheelwell on stock set up… 33’s do fit!

How do you find the gear ratio on a Jeep Cherokee?

So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.

How do I know what gear ratio my XJ?

You gear ratio is determined by the number of turns of the driveshaft it takes for 1 turn of the tire. 3 and a half turns to 1 = 3.55 gears. 4 turns to 1 = 4.10 gears, etc. Check for the ratio by jacking up the rear or putting it on a lift.

What size are stock Jeep XJ tires?

You’ll be able to fit 30″ tire while your Cherokee is stock. You could take the fenders off and do a small amount of trimming and fit 31″ tires if you wanted.

How much lift does a 33s XJ have?

most people would suggest around 4.5″, but i personally like 3″ lift on 33s for the low center of gravity and wide stance. gives the jeep a lot of stability. but to run this setup you will have to trim your fenders more than with a 4.5″ setup.

Can you fit 33s on a 3 inch lift XJ?

A 3″ lift with 33s will fit with wheels that have 4″ or less back spacing, cut fenders, and extended bump stops. If done properly it can be a great setup IMO.

What gear ratio is a Dana 35?

Dana 35 3.08-5.13 Ratio.

What size tires fit a 1994 Jeep Cherokee?

Jeep Cherokee 1994 2.1TD

Tire	Rim
215/75R15 100S	7Jx15 ET25	2.3
225/70R15 100S	7Jx15 ET25	2.3
225/75R15 102S	7Jx15 ET25	2.3
225/70R16 102S	7Jx16 ET25	2.3

How much lift does it take to clear a 33s Jeep XJ?

5-5.5″ will definitely do it for you, but without longer bump stops you may still hit the fenders with 33’s.

What size are stock XJ tires?

the sticker on the doors of xjs are almost all the same but they tires sizes range from 235 225 215 205 and 195 for the base model… i always have put on 235s on any jeep with no problem…