How do I fix my LG sound bar?

How to fix

1. To connect through OPTICAL cable when there is LG Sound Sync.
2. Try to reconnect the optical cable between TV and Sound Bar.
3. Press “Select Function” button on the Sound Bar remote control and set the Input Mode as “OPTICAL”.
4. After that, use the TV remote control and do as follows.

What is a LG SoundPlate?

WIRELESS AUDIO STREAMING The LG SoundPlate doubles as a wireless home audio device and a TV audio output so you can better enjoy your favorite movies, sports and shows as well as your music collection that can be streamed via Bluetooth with a compatible device.

Where is the pairing button on LG Soundbar?

Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds, until the led on the subwoofer blinks red and green alternating. Unplug the power cord of the soundbar and the wireless subwoofer. Connect them again after the LED of the main unit and the wireless subwoofer are fully turned off.

What causes a soundbar to stop working?

Most soundbar issues result from improper connection, an incorrect device setting, a poor physical arrangement. Most fixes are fairly simple, though some may require some time to troubleshoot.

How do I connect my LG Soundbar to Bluetooth?

Using Settings within the Android Menu Locate and tap the Settings icon. Select the Bluetooth. You may need to select Connections first. In the list of Available Devices, choose the Bluetooth accessory you wish to pair with.

How do you pair a LG sound bar to subwoofer?

Why is my LG subwoofer not working?

Try turning the volume down. For some reason, it’s easier for your subwoofer to connect to your soundbar if the soundbar’s volume is turned down. If none of these problems seem to be the issue, try unplugging both the LG soundbar and subwoofer. Leave them unplugged for at least five minutes, and then plug both back in.

What cable do I need to connect soundbar to TV?

An HDMI cable is by far the best way to hook your soundbar up to your TV.

Do soundbars use a lot of electricity?

Sound bars don’t tend to use too much extra power – usually around 10 watts or less, no more than a typical table-top radio.