How do I know what type of crankset I have?

Print. Shimano cranks are all identified with model information above or surrounding the area on the backside of the pedal threads. For example; FC-6700/6750 = Shimano Ultegra. The crank length is often located in the same area, which is helpful to note before placing an order.

How do I identify a Shimano crank?

Shimano cranks are all identified with model information above or surrounding the area on the backside of the pedal threads. For example; FC-6700/6750 = Shimano Ultegra. The crank length is often located in the same area, which is helpful to note before placing an order.

How do I know my crank size?

How to measure crank length? Crank length is measured from the centre of the bottom bracket axle to the centre of the pedal axle. If you’re not sure what length the cranks on your bike are, the quickest way of finding out is typically to just look at the backside of your cranks, just below the pedal axle.

Can the FSA MegaExo crankshaft spindles be used in any frame?

Can be used in BB30, PF30, BBRight, 386EVO frames with the appropriate length spindle. Designed to work in frames shell width from 68mm to 86.5mm. Designed to work in frames shell width from 68mm to 92mm. Splined interface much like Shimano HollowTech II. NOTE: FSA MegaEXO crank spindle diameters can be as large as 24.07mm.

Can a Cannondale crankset be used in a PF30 frame?

Different length spindles can be used depending on the frame/bottom bracket configuration Cannondale crank for use in BB30A or PF30A frames. 3-piece crankset with separate, replaceable spindle. Can be used in BB30, PF30, BBRight, 386EVO frames with the appropriate length spindle. Designed to work in frames shell width from 68mm to 86.5mm.

What is the crank spindle length of a shimnao crankshaft?

Current Shimnao crank specification. Spindle length varies depending on type of crank (road, Mountain, Triple, etc.). Two-piece system. Crank spindle is pressed into the drive side crank arm. SRAM / Truvative crank system. Spindle diameter is 24mm on the drive side, and 22mm on the non-drive side where the splines are.

Can a Cannondale crankset be used in a BB30 frame?

Cannondale crank for use in BB30A or PF30A frames. 3-piece crankset with separate, replaceable spindle. Can be used in BB30, PF30, BBRight, 386EVO frames with the appropriate length spindle.