How do I reset my Taotronics receiver?

In order to perform a “factory reset”, switch on the TT-BA01 transmitter first. Press the power button 2 times. Then the transmitter must be switched off again. The transmitter is now set back and can be connected to a new device.

How do you reset Taotronics Bluetooth earbuds?

Tap and hold the Multifunction Touch Control of both earbuds for 10 seconds until the LED indicators flash three times to enter reset mode. Take out both earbuds, and they will pair with each other automatically.

How do I reset my Taotronics TT ba014?

The adapter is unable to pair with audio transmitting devices e.g. smartphone in TX mode. To clear the pairing history in TX mode, tap and hold the Volume + for 7 seconds with the TX indicator and charging indicator flashing twice at the same time.

How do I reset my Taotronics TT ba09?

Press and hold the Power button on the unit for approx 3 seconds. Then press again the Power button 2 times.

Why is my Taotronics not working?

If the transmitter cannot pair with your Bluetooth device, clear the pairing history by pressing the Power Button twice when the transmitter are on until the LED indicator flashes red and blue alternately. Then restart the transmitter to pair again.

How do I reset my Bluetooth receiver?

To reset a Bluetooth device, open the Start menu and go to Settings > Devices > Bluetooth & other devices. Then select the Bluetooth device you want to remove and click Remove device > Yes. Finally, click Add Bluetooth or other device to reconnect your device.

Why is one of my Taotronics earbuds not working?

Please try to turn up the volume of the Bluetooth audio source device (such as TV or cell phone) to see if it can help; Please check if the audio input mode of the Bluetooth speaker has been switched to AUX mode and test it again.

How do I reset my TaoTronics TT bh22?

In order to perform a “factory reset“, simply press the multi function button for a couple of seconds while the headphone is turned OFF until the purple LED rapidly flashes two times. You will also hear two beeps. The headphone is now reset and can be paired with a new device.

Why is my TaoTronics not working?

How do I fix my TaoTronics Bluetooth headphones?

Factory Reset B

1. Take one earbud out of the charging case and close the case.
2. Press and hold the multi-function touch control for ~10 seconds until the light indicator flashes white thrice.
3. Take the other earbuds out, then press and hold the multi-function touch control for ~10 seconds until it flashes white thrice.

Why is my TaoTronics Bluetooth not working?

How do I reset my TaoTronics wireless mono headset?

If the headset fails to pair with your Bluetooth device clear the pairing history by pressing and holding the Multifunction and Volume – Buttons simultaneously when the headset is on until the LED indicator flashes red and blue at the same time indicating clearing successfully.

How do I reset my Bluetooth transmitter and receiver?

Resetting Transmitter/Receiver Devices

1. Make sure device is off.
2. Move the TX / RX switch to the opposite position.
3. Turn device on.
4. When device starts flashing red and blue, turn it off.
5. Move the switch back to the original TX or RX position.

How do you refresh Bluetooth?

Reset Bluetooth Settings 1: Go to Settings -> System and tap the Advanced drop-down button. 2: Select Reset options and then tap Reset Wi-Fi, mobile, & Bluetooth. 3: Tap the Reset settings button below and enter your phone’s PIN when asked.

How do I fix my TaoTronics headphones?

Where is the multifunction button on TaoTronics earbuds?

Step 2. Press and hold the multi function button (middle) on the headset control unit for approx 3 to 5 seconds. The LEDs will flash red and blue. The headphones are now ready for pairing and can be connected with other Bluetooth enabled devices.

Why are my Taotronics headphones not turning on?

Device Not Turning On Make sure the device is properly charged. Try using while device is plugged in to be sure it is a battery issue.

Why is only one of my TaoTronics working?

These earbuds can only connect to one device at a time so if they accidentally connect to another signal or device, or a device they were previously paired with then the reset will not work effectively. Make sure the case is charged fully and the earbuds as well.