How do you make a nut in SolidWorks?

How do you make a nut in SolidWorks?

How to create hexagonal nut in solidworks in simple steps

  1. Step 1: Selection of plane and basic sketch. Select the top plane and sketch on it.
  2. Step 2: Extruding the sketch. Select Extruded Boss.
  3. Step 3: Adding chamfer. Add chamfer on both sides of the part.
  4. Step 4: Creation of hex shape.
  5. Step 5: Apply thread.
  6. Step 6: Rendering.

How do you assemble threaded parts in SOLIDWORKS?

To add a screw mate:

  1. Click Mate (Assembly toolbar) or Insert > Mate.
  2. In the PropertyManager, under Mechanical Mates, click Screw .
  3. Under Mate Selections, select the rotation axes on the two components for Entities to Mate .
  4. Under Mechanical Mates: Option. Description. Revolutions/ length_unit.
  5. Click .

How do you create an internal thread in Solidworks?

Creating a Cut Thread

  1. Open a part file. The diameter of the cylinder is 6mm.
  2. Click Insert > Features > Thread .
  3. In the graphics area, select the top edge of the cylinder.
  4. In the PropertyManager, under Specification:
  5. Under Thread Location:
  6. Under End Condition, click Maintain Thread Length.
  7. Click .

How do you make threaded screws in Solidworks?

How do you fit a nut and bolt?

How to fit and remove a nut and bolt?

  1. Step 1 – Locate Bolt Holes. You may need to drill bolt holes or they may already be in the workpieces.
  2. Step 2 – Line Up Bolt Holes. Move the workpieces so the bolt holes line up.
  3. Step 3 – Fit the Nut.
  4. Step 4 – Use Your Spanner.
  5. Step 5 – Troubleshooting.

How do you attach a bolt?

Take a nut that fits the bolt and place it at the opposite side of the bolt, away from the head. Then grab the head of the bolt so that it doesn’t move around and hold it still while you spin the nut clockwise, gently pressing down on it.

How do you mate a bolt and thread in SolidWorks?

How do you draw a nut step by step?

This makes it a more difficult nut to draw then the previous examples.

  1. Step 1 – Make a Construction Drawing of the Walnut. Walnut construction drawing.
  2. Step 2 – Make an Outline Drawing. Walnut outline drawing.
  3. Step 3 – Finish the Line Drawing.
  4. Step 4 – Add Basic Shading.
  5. Step 5 – Refine the Shading.
  6. Step 6 – Finish the Drawing.

How do you create external threads in Solidworks?

Using the Thread Tool The Thread Tool can then be found underneath the Hole Wizard Tool on the Features tab of the Command Manager, or in Insert>Features>Thread. Once the Thread Tool is selected the location of the thread needs to be specified by selecting a circular edge. Then the thread specification should be set.

How do I create an internal thread in Solidworks 2020?

Creating a Cut Thread

  1. Open a model with a cylindrical part and click Insert > Features > Thread .
  2. In the graphics area, select a circular edge.
  3. In the PropertyManager, under Specification, set values for the following:
  4. For Thread method, click Cut thread.
  5. Set the starting position of the Thread Location: