What does silver ion do in hot tub?

The silver ion cartridge is then installed in the filter standpipe and automatically release silver ions into the water that inhibit the growth of bacteria. The spa owner is required to manually add MPS to the spa with each use, and a small amount of chlorine once a week.

What chemicals do you put in hot tub after refilling?

When a hot tub has been refilled, it is important to give the water a high dose of sanitiser. This can be done by adding 60g of chlorine granules per 1,500 litres of water to start the sanitation process and allow the level to drop to 3-5mg/l before using the hot tub.

What is the safest chemical to use in a hot tub?

iONRx can be used with ALL TYPES of hot tubs. It is completely non-corrosive and is the safest chemical to use in your hot tub – even inflatable hot tubs. No more shock, bromine, enzymes, stain, and scale – all of that is eliminated.

How long does a silver ion cartridge last?

4 months
Just put the silver ion purifier in the open standpipe of your filter and the silver ions are introduced into the water to inhibit bacterial growth and keep the water clear. It lasts 4 months!

What is a silver ion cartridge?

Description. Use the power of nature to purify and sanitize your spa with the Hot Spring Freshwater silver ion purifier. This sanitizer continuously introduces positive silver ions to kill bacteria and inhibit future bacterial growth.

Do you need to shock a hot tub when you first fill it?

A hot tub should not be shocked after refilling as the purpose of shock is to reactivate the sanitizer. When it has just been refilled, adding sanitizer is sufficient. It is only after it has been used for a week or a high frequency of usage that shocking becomes necessary.

Do you need to shock your hot tub after refilling?

No, you don’t need to shock your hot tub after adding fresh water. This is because there are no contaminants in the water preventing the sanitizer (chlorine or bromine) from doing its job.

Do hot tub ionizers work?

Ionizers provide the perfect means to not only keep your water clean and clear, but they also reduce hot tub chemical usage and extend the life of your hot tub and its components. That’s because ionizers continually release positively charged microscopic ions such as zinc, copper, and silver into the water.

Can I use my hot tub without chemicals?

It’s not advisable to use a hot tub without any chemicals. Without chemicals, the hot tub becomes unsafe and can cause hot tub rash, and the water becomes host to harmful microorganisms. Over time, the contaminants in the water also have an adverse effect on the hot tub’s equipment.

What is best to use in hot tub?

The best chlorine for your hot tub is sodium dichlor. In granule form, sprinkle them over the surface of the water after each use.

Is shock the same as chlorine?

Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.

How do you treat a hot tub for the first time?

How to Start a Hot Tub in 12 Easy Steps

1. Rinse and Drain. If you’re a new hot tub owner, you’re going to have to get used to the cleaning that comes with hot tub ownership.
2. Turn off All Power.
3. Clean the Empty Hot Tub.
4. Install or Clean the Filter.
5. Fill Your Hot Tub.
6. Prime the Pump.
7. Add the Start-Up Chemicals.
8. Run the Pump.

How often should I shock my hot tub?

once every week
Regular hot tub shocking is inevitable to keep your water clean and safe for use. Dead skin and other elements like hair may end up dropping in the hot tub, leaving the tub in a mess. It is essential to shock the hot tub frequently – at least once every week.

Is shock and chlorine the same thing?

Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.

Do I need chlorine if I have an ionizer?

Note: A swimming pool cannot rely on an ionizer alone for sanitation. Ionizers work too slowly to be effective on their own and require another sanitizer such as chlorine to make the pool safe for swimmers, as well as an oxidizer to eliminate organic contaminants.

Can you use chlorine with an ionizer?

It has been observed that when ionizers are combined with low levels of chlorine; they work more effectively. You can opt for such services during your swimming pool installation in NJ or at the time of repair and maintenance.

Can I use silver sanitizer in my hot tub?

If you spa is equipped with an ozone system a silver sanitizer will greatly enhance its performance. It should also be noted that can only be used with a chlorine hot tub (and not a water clarifier or bromine system).

What is hot tub silver and how is it made?

Hot Tub Silver is added when the water in the hot tub is changed. This product is a very concentrated form of colloidal silver. Our colloidal silver is a high particle concentration silver colloid.

What happens when you add colloidal silver to your hot tub?

But if the water does not remain fresh and clear, they gradually increase their weekly colloidal silver hot tub infusion until they find the amount that keeps the tub water crystal clear, and with no slime on the inside of the tub.

Is hot tub silver toxic to humans?

Hot Tub Silver is non-toxic. See Material Safety Data Sheet (MSDS) Not for human consumption. Helps to eliminate the dry itchy skin caused by large quantites of chemicals in your hot tub.