What is a spindle sleeve?

These spindle sleeves are used on door handles and some window handles with spindles. They allow the use of smaller spindles to be adapted to a thicker size.

Can you replace a spindle on a trailer axle?

Expert Reply: To replace a spindle, the old one would need to be cut off, and the new one welded into place. This is NOT a job for the do-it-yourselfer. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel tracking problems.

What is a repair sleeve?

A shaft repair sleeve is a very thin metal sleeve that can be inserted onto a worn or damaged shaft as a quick and cost-effective alternative to repairing the shaft.

What is a wear sleeve?

Wear Sleeves are a product designed to either protect or take up an imperfection on a shaft. There are two main types of wear sleeves. The most common type is a thin walled metal sleeve that slides onto a shaft and is placed over a worn or marred section of a shaft that a seal rides on.

Can you reuse a wheel seal?

If you are replacing bearings it is usually best to replace the grease seals as well because although they may still be in good shape, it’s very hard to get them out without damage which is needed to change the inner bearing. If you can remove it without damage and it’s still in good shape then by all means reuse.

Can you Rethread a trailer spindle?

As long as the spindle end is not split or metal is missing, the end can be welded up, machined down, and rethreaded.

Are trailer spindles welded on?

Spindles are welded to the axle, so a do-it-yourself replacement may be out of the question for some trailer owners. As you can imagine, lubrication around the spindle is critical to keep the bearings spinning and to prevent the hub from making contact with the spindle’s surface.

What is a Speedi sleeve?

Shaft Repair Sleeves Also known as speedi sleeves, use these to repair and protect worn shafts for a smooth sealing surface without machining. Each sleeve comes with an installation tool.

What does an axle sleeve do?

Sleeves are used to support the axle tubes. Both are used to prevent bending/breaking.

Can you reuse axle seals?

You should replace seals, not reuse them. Put the axel back in with the old seal if you need the car. Worse case is it leaks and you’ll have to replace the seal at a later date.

Can I reuse trailer bearing seal?

Can you weld on a trailer axle?

Set your welder up so that you can lay a good hot penetrating weld (practice on some scrap steel) and fully weld around the spindle and axle tube. Fill the plug weld holes up until the weld is flush with the top of the axle tube. Let the axle cool down slowly – do not quench or spray with water!

Where can I get an axle shaft repair sleeve?

Shop for the best Axle Shaft Repair Sleeve for your vehicle, and you can place your order online and pick up for free at your local O’Reilly Auto Parts. Sorry, you’re using a web browser that is no longer supported.

What is a grease seal sleeve?

Shipping calculated at checkout. This stainless steel sleeve provides a smooth surface for the grease seal to ride on. Grease Seals will last many years because they ride on a permanently smooth, corrosion-proof surface.

Where can I buy the parts needed to repair my trailer?

All the parts needed to repair and maintain your trailer including Axles Torsion, Axles Torsion, Axles Torsion from TrailerPartsDepot.com

What are the different types of shaft repair sleeves?

Auxiliary Shaft Repair Sleeve Axle Differential Repair Sleeve Axle Shaft Repair Sleeve Balance Shaft Repair Sleeve Camshaft Repair Sleeve Crankshaft Repair Sleeve