What size is a 9 32 socket?

SAE to Metric Conversion Chart

SAE	Metric	Inch
9/32″		0.281
5/16″		0.313
	8mm	0.315
11/32″		0.344

What number is a 9/16 socket?

SAE to Metric Conversion Chart

SAE Size	Metric Size	Inches Decimal
	13mm	0.512
17/32″		0.531
	14mm	0.551
9/16″		0.563

What is a 3/8 socket set?

(8 products) 3/8″socket sets can be used in domestic or commercial settings. They are designed for tightening or loosening a wide range of fastener sizes and types.

What MM is 9 32 socket?

7.14
Convert between US Inches and metric mm wrench and spanner sizes.

Standard SAE US Wrench/Spanner Size (inches)	Metric Wrench/Spanner Size (mm)
17/64	6.75
	7
9/32	7.14
5/16	7.94

What is the outside diameter of a 3/4 socket?

Impact 3/8″ Drive Deep Well Sockets Features:

Item #	Diameter	Tip Outside Diameter
1877479	3/4″	1-1/16″ / 27mm
1882332	13/16″	1-3/16″ / 30mm
1877480	7/8″	1-3/16″ / 30mm
1882333	15/16″	1-1/4″ / 32mm

What MM is 9/16 socket?

14.29
Convert between US Inches and metric mm wrench and spanner sizes.

Standard SAE US Wrench/Spanner Size (inches)	Metric Wrench/Spanner Size (mm)
17/32	13.49
	14
9/16	14.29
	15

What is a 7/8 wrench in metric?

7/8″ 34mm. 1-5/16″

How do I know my ratchet size?

How to Determine the Right Size Socket for a Nut

1. Turn on the digital caliper and set it to read in inches, not millimeters.
2. Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
3. Check the caliper display.
4. Turn on the digital caliper and set it to read in millimeters, not inches.

Will a 9mm bolt fit a 14 16?

But thats no biggie ~ to answer your question, 9/16 SAE is actually 14.3 Metric, but it is the closest SAE size that will fit a 14mm metric head. Hope that helps!

Is 9/16 The same as 13mm?

13mm = just over 1/2 inch. 14mm = almost 9/16 inch. 15mm = almost 19/32 inch. 16mm = 5/8 inch.

Is 9/16 and 14mm the same?

14mm = almost 9/16 inch. 15mm = almost 19/32 inch. 16mm = 5/8 inch. 17mm = almost 11/16 inch.