Where can I find GT40P heads?

Where can I find GT40P heads?

The GT40 heads can be found specifically on the 1993-1995 SVT Cobra Mustang as well as the 1993-1995 SVT Lightning. These can also be found on the 1996-Mid 1997 Ford Explorer & Mercury Mountaineer SUV.

Are GT40 heads better than GT40P?

GT40 vs GT40P, which are better? Really, when you get down to it, neither head is any measurable difference better than the other. The GT40P does have a slight edge over the GT40 cylinder head because of its smaller chamber volume. The smaller combustion chamber can net a bit more compression, but only marginally.

What size valves are in GT40P heads?

The GT40 valve sizes are 1.85/1.54 for the intake and exhaust, while the GT40P went to a smaller 1.46-inch exhaust valve. There were other changes to the GT40P, including a slightly smaller combustion chamber reduced from 65 cc to roughly 60, which benefits the compression ratio.

How much horsepower can you get out of a 302 Ford?

Standard Ford 289 and 302 small-blocks were factory-rated between 200 and 230 hp. The vaunted 289 High-Performance engine was said to make 271 hp. Today, if a 302 Ford makes 360 hp on pump gas with a hydraulic cam, most experts consider it to be a pretty good motor-at least until Joe Sherman steps up to the plate.

What engines came with GT40 heads?

Modern vs Fox Body Mustang Cylinder Heads

Cylinder Head Intake Port Combustion Chamber
E7 124cc 61cc
GT40 145cc 61cc
GT40P 145cc 59cc
Edelbrock Victor Jr. 210cc 60cc

What is a gt40?

The Ford GT40 is a high-performance endurance racing car commissioned by the Ford Motor Company. It grew out of the “Ford GT” (for Grand Touring) project, an effort to compete in European long-distance sports car races, against Ferrari, which won the prestigious 24 Hours of Le Mans race from 1960 to 1965.

What engines came with gt40 heads?

What did the gt40 intake come on?

In reality, the official ‘GT40’ intake was of a tubular design (AKA, very pretty), and was offered by Ford Racing via their aftermarket catalog. The GT40 intake did not come stock on any Mustang or Explorer, but it did come on 93-95 Lightnings.

Are GT40 heads iron?

Additionally, either the E7 or the GT40 cylinder heads are going to be made of cast iron.

Which vehicles have GT40 heads?

1993-1995 Mustang Cobra|Part#F3ZE or F4ZE

  • 1996-Mid 1997 Ford Explorer&Mountaineer SUV|Part#F1ZE-AA
  • 1993-1995 Ford F-150 Lightning|Part#F3ZE or F4ZE
  • Are GT40 heads any good?

    Yes, some fox body owners out there are still “striking gold” in salvage yards when they find the good ol’ GT-40 heads, and they are still good value-for-money and will help you build a cheap 300HP 5.0L but do you know the history of these things?

    What do all vehicles did GT40 heads come on?

    What Are GT40 heads? Between 1993 and 1995, Mustang Cobras came equipped with a type of cylinder head called a GT40. These cylinder heads were a vast improvement over the E7TE cylinder heads that came on most Fox Body Mustangs. That might have been the end of the discussion if the Cobra were the only vehicle that the GT40 head came equipped on but several other Ford vehicles, including the ubiquitous Explorer and Mountaineer, were also equipped with GT40Ps, a variant of the GT40 cylinder head.

    How to identify GT40 cast iron heads?

    – Heavy, outdated iron design – May need upgraded springs (GT40P’s). – Only good for 20-40 HP.