What kind of transmission fluid does a Mazda 626 take?

The Mazda 626 SHOULD use Dexron-III Mercon or its superceding Dexron-IV Mercon.

How do you put transmission fluid in a Mazda 626?

On the driver’s side of the transaxle, there’s 2 large plugs, the one at the bottom horizontal surface is the drain plug, the one up a few inches and almost vertical is the fill. You’ll need a funnel and a long tube that you can bend to go into that hole.

What kind of transmission fluid does a 2000 Mazda 626 take?

Dexron III / Mercon
FRAM Transmission Fluid – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 5 Gallon (Part No. F420-5)

What transmission fluid does Mazda use?

Mazda Automatic Transmission Fluid [ATF M-V (Type M5)] Automatic transmission fluid (ATF) is the fluid used in vehicles with self shifting or automatic transmissions.

What type of transmission fluid does a Mazda 6 take?

DEXRON®-VI ATF
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No. 883572)

How much oil does a Mazda 626 take?

Protect your 626 with Amsoil and support the best MADE in USA oil! With filter 4.4 quarts After refill check oil level. AMSOIL OE Synthetic Motor Oil is specially made for the extended oil change intervals recommended for your 2000 Mazda 626 2.5L engine.

What color is Mazda transmission fluid?

Red
Red is the color of the transmission fluid when it’s first put into your Mazda, so it’s safe to say that fluid is still in good shape if it is this hue. The fluid is clean, viscous, and able to continue to lubricate your transmission’s parts when it’s red or bright red.

How do you check transmission fluid on a Mazda?

Checking Your Own Transmission Fluid

1. Turn the car on.
2. Find the transmission fluid dipstick.
3. Remove the dipstick and touch the fluid, moving it around between your thumb and forefinger.
4. Use a rag to wipe off the dipstick.
5. Use a funnel to bring the fluid level up to the right spot.

How many quarts of transmission fluid does a Mazda 6 hold?

3.7 quarts
Automatic Transmission Fluid 3.7 quarts Initial FillCapacity ranges from 3.5L-4.9L 3.7 Qts-5.1 Qts.

What kind of oil does a 1999 Mazda 626 take?

Mobil 1 – Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart (Part No. 14977)

Can I use dexron III instead of dexron VI?

DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.

How do you check the oil on a Mazda 626?

Check Oil Level 1998-2002 Mazda 626 LX 2.0L 4 Cyl.

1. Remove Dipstick – Locate, remove and wipe oil dipstick.
2. Read Oil Level – Reinsert dipstick, remove and then read oil level.
3. More Info. – Additional information on the oil level.